Instrument Making Link / Vinculo construccion Instrumentos

Moderators: earthjig, anima

        Traduzca
   

Re: Instrument Making Link / Vinculo construccion Instrumentos

Postby Art » Sat Apr 24, 2010 4:32 pm

Do you know what the diameter of the bore is at its smallest and largest?
Art
 
Posts: 51
Joined: Thu Dec 10, 2009 12:40 am
Location: Maryland, USA

Re: Instrument Making Link / Vinculo construccion Instrumentos

Postby dan chaffee » Sat Apr 24, 2010 9:00 pm

My chanter's bore is 19mm at the bottom and 4mm at the narrowest part of the throat, just below the reed seat.
dan chaffee
 
Posts: 42
Joined: Wed Apr 15, 2009 2:14 pm
Location: Kansas City, Missouri USA

Re: Instrument Making Link / Vinculo construccion Instrumentos

Postby Art » Sat Apr 24, 2010 10:18 pm

That sounds pretty decent. I haven't measured a Galician, but it's similar to my Asturian, although the Asturian is a tiny bit narrower at the top (~3.66 mm) and wider at the foot (~22.93 mm).

Does the bore increase in a linear manner? (Is the line between 4 mm and 19 mm straight?)
Art
 
Posts: 51
Joined: Thu Dec 10, 2009 12:40 am
Location: Maryland, USA

Re: Instrument Making Link / Vinculo construccion Instrumentos

Postby dan chaffee » Sun Apr 25, 2010 4:29 am

Yes, It's staight and smooth.
dan chaffee
 
Posts: 42
Joined: Wed Apr 15, 2009 2:14 pm
Location: Kansas City, Missouri USA

Previous

Return to Gaita Making/Fabricación de Gaitas

Who is online

Users browsing this forum: No registered users and 1 guest

cron